Reset change oil light indicator service Fiat 500

How do you reset maintenance light, reset service light indicator Fiat 500, from year: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Fiat 500, oil reset instructions:

How to reset change oil indicator system Fiat 500.

Your vehicle is equipped with an engine oil change indicator system. The “Change Engine Oil” message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil changeindicator system is duty cycle based, which means the engine oil change interval may fluctuate, dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily, press and release the MENU/ESC button. To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure.

1. Turn the ignition switch to the ON position. Do not start the engine.
2. Fully depress the accelerator pedal slowly, three times within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.

If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure.

All information how to reset change oil light indicator is taken from Fiat 500 owners manual.