Indicator oil reset light service TOYOTA Sequoia 2006

TOYOTA Sequoia reset service light indicator, engine oil life, service indicator oil reset maintenance light TOYOTA Sequoia, oil reset instructions:

How do you oil reset maintenance light TOYOTA Sequoia, maintenance light, TOYOTA Sequoia reset service light indicator years 2006, 2007, 2008, 2009, 2010 For reset maintenance light and that can be made manually by use button on car dashboard.

For TOYOTA Sequoia years 2009, 2010 models the oil reset maintenance light system can also be reset as follows:

1.Turn the ignition to run (one position before starting engine).
2.Ensure Trip Metre A reading is shown. Turn the ignition off.
3.While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
Without multi-information display
4. Continue to press and hold the button until the trip meter displays “000000”.
With multi-information display
4. Continue to press and hold the button until ěMAINT REQD RESET MODE COMPLETE” appears on the multi-information display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

For TOYOTA Sequoia years 2007, 2008 models the oil reset maintenance light system can also be reset as follows:

1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates “000000” and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

For TOYOTA Sequoia years 2006 models the oil reset maintenance light system can also be reset as follows:

1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates “000000” and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

TOYOTA Sequoia reset service light indicator

This reset should be done after changed the engine oil and filter according to the technical specifications relating Manufacturer. Resetting without changing the engine oil lead to premature engine wear and serious problems in the functioning of these. If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure.