Hummer H3 oil reset service light indicator, engine oil life, service indicator oil reset maintenance…
Service oil reset Hummer H2
Hummer H2 oil reset service light indicator, engine oil life, service indicator oil reset maintenance light Hummer H2, oil reset instructions:
How do you oil reset maintenance light Hummer H2, maintenance light, Hummer H2 oil reset service light indicator years 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010. For reset maintenance light and that can be made manually by use button on car dashboard.
For Hummer H2 years 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010. models the oil reset maintenance light system can also be reset as follows:
2003
Turn the ignition to run (one position before starting engine).
Press the fuel information button (located on instrument panel cluster above steering column) until ENGINE OIL LIFE appears in the display.
Press and hold the select button (arrow button) for 5 seconds while ENGINE OIL LIFE is displayed. OIL LIFE RESET will appear on the display for 10 seconds to let you know the system is reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2004-2007
Turn the ignition to run (one position before starting engine).
Immediately after step 1 press and release the accelerator pedal 3 times within 5 seconds. If the OIL LIFE RESET message flashes for 10 seconds, the system is resetting.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2008-2010
Turn the ignition to run (one position before starting engine).
Display the OIL LIFE REMAINING on the DIC by pressing the (i) button.
Press and hold the SET/RESET button (check mark button) on the DIC for more than 5 seconds. The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Hummer H2 oil reset service light indicator
This reset should be done after changed the engine oil and filter according to the technical specifications relating Manufacturer. Resetting without changing the engine oil lead to premature engine wear and serious problems in the functioning of these. If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure.