Indicator oil reset light service Toyota 4Runner

Toyota 4Runner oil reset service light indicator, engine oil life, service indicator oil reset maintenance light Toyota 4Runner, oil reset instructions:

How do you oil reset maintenance light Toyota 4Runner, maintenance light, Toyota 4Runner oil reset service light indicator years 2014, 2015, 2016. For reset maintenance light and that can be made manually by use button on car dashboard.

For Toyota 4Runner years 2014, 2015, 2016 models the oil reset maintenance light system can also be reset as follows:

A. Vehicles with smart key system:

1. Start the engine and bring up the trip meter A reading.
2. Turn the “ENGINE START STOP” switch off.
3. While pressing the Trip Meter reset button, press the “ENGINE START STOP” switch once (do not start engine).
4. Continue to press and hold the button until the trip meter displays “000000”.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

B. Vehicles without smart key system:

1. Start the engine and bring up the trip meter A reading.
2. Turn the ignition switch off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates “000000” and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Toyota 4Runner oil reset service light indicator

This reset should be done after changed the engine oil and filter according to the technical specifications relating Manufacturer. Resetting without changing the engine oil lead to premature engine wear and serious problems in the functioning of these. If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure.